Unistrut P1063 HG 3/8 Inch Hot Dip Galvanized Steel 1-Hole Channel Flat Plate | Quality Electrical Distribution (QED)
Product image for Unistrut P1063 HG 3/8 Inch Hot Dip Galvanized Steel 1-Hole Channel Flat Plate
Image thumbnail 0
Image thumbnail 1
To:
CC:

Unistrut P1063 HG 3/8 Inch Hot Dip Galvanized Steel 1-Hole Channel Flat Plate

Manufacturer: Atkore | UniStrut | Catalog # P1063-HG | QED Part # 4485075
*Call For Price*
Log in or register to view your price, purchase history, and more!
Usually ships within 6 to 10 days
Primary Spec Sheet
3/8" Hot-Dipped Galvanized Flat Plate Fitting

Technical Information

Applications
For Use With 1-5/8 IN Channel
Material
Steel
Type
One Hole Washer

Manufacturer Information

Brand
Unistrut

General Product Info

12-Digit UPC
786364016542
Finish
Hot Dipped Galvanized
Product UPC
78636401654
Weight
18.0 lb

Dimensions

Depth
1-5/8 Inch
Thickness
1/4 in
Width
1.625 in
Beam Clamps
  • Clamps are designed to be used with W, M, S and HP Shape beams, Standard C and Miscellaneous MC Channels, Angles and Structural Tees.
  • Clamps must be used in pairs where indicated.
  • For beam clamps with HG finish, standard hardware is EG finish. For optional stainless steel hardware, please contact the factory for availability.
Note
  • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
Dimensions
  • Imperial dimensions are illustrated in inches. Unless noted, all metric dimensions are shown in millimeters.
Material
  • Fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, bar, strip or coil, and conform to one or more of the following specifications: ASTM specifications A575, A576, A635, A1011 SS GR 33, A1011 HSLAS GR 45 or A36. All fittings meet or exceed physical properties of ASTM A1011 GR 33. The pickling of the steel produces a smooth surface free from scale.
Design Load
  • Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted.
Application
  • All parts drawings illustrate only one application of each fitting. In most cases many other applications are possible. The channels shown in the illustrations are P1000, 1-5/8\" square, except where noted otherwise.
  • All 9/16\" diameter holes use 1/2\" x 15/16\" hex head cap screws and 1/2\" nuts - P1010, P4010 or P5510 - depending on the channel used. Nuts and bolts are not included with the fitting and must be ordered separately.
Compare